Playing Audio from a Bluetooth Device
1. Press the MODE button repeatedly until the bt icon appears on the display screen.
2. Press the Preset button on your speaker to play audio from your linked Bluetooth device.
3. Press the + or – buttons to go to go back to the last track in a playlist or advance to the next track.
4. Press the VOL + or VOL- buttons to adjust the volume.
5. When done listening, press the Power button to turn the unit off. Remember to turn off your audio device,
too.
Pairing Two IMW465 Speakers with Your Bluetooth Device for True Stereo Sound
You can pair two speakers into the left and right channels to get true stereo sound. To do so, follow the steps
below:
1. Press the POWER button to power on your speaker.
2. Press the MODE button repeatedly until the bt icon appears on the display screen.
3, Press and hold the “TWS” button on the rear cabinet for 1 second to change the Bluetooth mode until the
“bt” appears on the display and you hear “Powering ON” and beep sound then enter to “pairing mode of the
L / R both speakers” and you hear a sonar sound from both speakers. Also LED will start blink GREEN.
4 ,Both speakers will begin to pair together automatically. You hear the voice “You are now paired enjoy” and
the Green LED light will turn on steadily. *Pairing process will take up to 30~60 seconds.
5, After successful pairing both two speakers. You see the blue LED light starts blinking on one of either
speaker. Now you may pair to your phone or Bluetooth device.
6. Pair your speakers with your Bluetooth device.
To Next Page
Loading...
