V1 JUIN 2010 ALTECH Generation ALL IN ONE Type Heat Pump Water Heater Technical Manual
35
CANCEL:
In the unlocked status, press the
CANCEL key for 1s, the TIMER ON
and TIMER OFF fuction will be
canceled.
NOTE:
1) TIMER ON and TIMER OFF can not be set to the same time. If they are the same, the stop time will delay 10 minutes
automatically.
For example,Time on and Time off set to 1:00 at the same time,then the stop time will adjust to 1:10
automatically.
2) TIMER OFF function can not be used alone. The key can be used only after stetted the on time.
2.2.4.8 Power On and Power Off
Press Power On/Power Off button after all the above have finished and the system will run as the setting.
And simply press the same button to stop it.
2.2.4.9 Operation status
The LA code from the screen of set Temp. will appear and remind user when ambience temp. not meet the
opetation condition of heat pump unit(beyond -7℃43℃)℃User can sw-itch the economy mode to E-heating
mode in sure of enogh volume of hot water if need, The unit will return operation pre-status automatically
in no any opetation when the ambie-nce temp. meet the operation condition of heat pump mode and the
error LA will be disappeat at the same time,the screen display nomally.
2.2.4.10 Error Shooting
If some errors happen, the buzzer will buzz 3 times every other minute and the error indicator will glitter
fast. Press CANCEL for several seconds to stop the buzzer but the light will keep glittering.
To Next Page
Loading...
Need help?
General