29
2. Reduce air resistance in the smoke
guide by opening the by-pass valve.
Lower the right-hand handle to the
rear of the stove.
5. Close the door once the fi re is burning
well. At the same time the grate closes almost
completely
4. Leave the door slightly ajar, the
grate will stay slightly open.
Leaving the door slightly ajar after
lighting prevents creosote from
depositing on the glass. Creosote
causes stains that are diffi cult to
remove
3
2
4
5
3. Position fi relighters in the middle of the
grate. Build a pyramid of kindling around the
fi relighters. Light the fi relighters.
Choosing the right kindling (size and type)
allows heat to be generated more quickly.
Preferably use fi nely chopped lightwood. The
faster the stove reaches maximum temperature,
the faster circulation is established, and the less
soot and creosote is created. This keeps the
stove, smoke guide and environment clean.
To Next Page
Loading...
General