Altera Cyclone V Boot Guide

HPS SoC Boot Guide - Cyclone V SoC Development Kit
2016.01.27
AN-709
Subscribe
Send Feedback
Introduction
is document describes:
• An overview of the boot options available on the Cyclone
®
V
• Recommendations to help reduce the boot duration, including measurements of the boot process on
the Cyclone V Development Kit
• Recommendations to help with debugging the boot process
• Bare-metal boot examples that can be run on the Cyclone V SoC Development Kit
Note: Although the document targets Cyclone V, it also applies to Arria
®
V, since the HPS portion is
identical between the two families.
Prerequisite
In order to run the examples presented in this Boot Guide the following are required:
• Altera
®
Cyclone V Development Kit, Rev D
• Host PC running Windows 7 or newer
(1)
• Altera SoC Embedded Design Suite (SoC EDS), v14.1 installed
• Altera Complete Design Suite (ACDS) v14.1
(2)
Note:
is document assumes a basic knowledge of Altera SoC EDS, ACDS, Preloader Support Package
Generator (part of SoC EDS) and ARM DS-5 AE.
Related Information
• Cyclone V Development Kit and SoC Embedded Design Suite
For more information about the Cyclone V SoC Development board.
• SoC EDS Download
For more information about and where to obtain the latest SoC EDS downloads.
• ACDS Download
For more information about and where to obtain the latest ACDS downloads.
• Altera SoC Embedded Design Suite User Guide
(1)
Linux can also be used, with similar commands.
(2)
Required only for the boot from FPGA example.
Intel Corporation. All rights reserved. Intel, the Intel logo, Altera, Arria, Cyclone, Enpirion, MAX, Nios, Quartus and Stratix words and logos are trademarks of
Intel Corporation or its subsidiaries in the U.S. and/or other countries. Intel warrants performance of its FPGA and semiconductor products to current
specications in accordance with Intel's standard warranty, but reserves the right to make changes to any products and services at any time without notice.
Intel assumes no responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly
agreed to in writing by Intel. Intel customers are advised to obtain the latest version of device specications before relying on any published information
and before placing orders for products or services.
*Other names and brands may be claimed as the property of others.
ISO
9001:2008
Registered
www.altera.com
101 Innovation Drive, San Jose, CA 95134

Altera Cyclone V Specifications

General

Family	Cyclone V
Manufacturer	Intel (formerly Altera)
Process Technology	28 nm
Logic Elements	25K to 301K
Transceivers	Up to 12
Transceiver Speed	Up to 5 Gbps
HPS Clock Speed	Up to 925 MHz
Ethernet MAC	1 or 2
USB OTG	1
CAN	2
Package Options	FBGA, UBGA
Operating Temperature	-40°C to 100°C (Industrial)
Core Voltage	1.1V
HPS	Dual-core ARM Cortex-A9 MPCore