Need help?Do you have a question about the Altera DE2-115 and is the answer not in the manual?
General| Logic Elements | 114, 480 |
|---|---|
| Embedded Memory | 3, 888 Kbits |
| PLLs | 4 |
| VGA Output | Yes |
| Audio CODEC | 24-bit |
| SD Card Slot | Yes |
| Switches | 18 |
| LEDs | 18 red, 9 green |
| Push-buttons | 4 |
| 7-Segment Displays | 8 |
| FPGA | Cyclone IV EP4CE115 |
| USB Port | USB 2.0 |
| Clock Inputs | 50 MHz oscillator |
| Connectors | Expansion Headers |
| HDMI | No |
Details the components included in the DE2-115 development board package.
Instructions for assembling the protective stands for the DE2-115 board.
Identifies and locates key components and connectors on the DE2-115 board.
Step-by-step guide for powering on and verifying the initial functionality of the DE2-115 board.
Procedures for installing and activating the DE2-115 Control Panel software utility.
How to control basic output devices like LEDs, 7-segment displays, and LCD via the Control Panel.
Procedures for downloading configuration bit streams to the Cyclone IV E FPGA using JTAG or AS programming.
Describes the functionality and connections of push-buttons and slide switches on the DE2-115 board.
Overview of memory devices including SRAM, SDRAM, Flash, EEPROM, and SD Card.
Introduction to the DE2-115 System Builder software utility.
Detailed procedures for using the DE2-115 System Builder to generate Quartus II projects.
Options within System Builder to enable or disable board components for design.
Instructions for installing demonstration projects from the DE2-115 System CD.
Demonstrates playing video and audio using VGA output and the TV decoder.
Implements an SD Card Music Player using the board's audio DAC circuits.
Shows how to implement an audio recorder and player using the built-in Audio CODEC.
Lists the changes and updates made to the document across different versions.
To Next Page
