GE TTING STARTED W ITH ALTERA’S DE-SER IES BOARDS For Quartus Prime 16.0
Figure 8. The driver is installed.
5 Using a DE-series Board
A DE-series board is used in conjunction with the Quartus Prime software. A reader who is not familiar with this
software should read an introductory tutorial. There are three versions of the tutorial:
• Quartus Prime Introduction Using Verilog Designs
• Quartus Prime Introduction Using VHDL Designs
• Quartus Prime Introduction Using Schematic Designs
Each of these tutorials cover the same aspects of the Quartus Prime software, differing only in the design entry
method that is used. The tutorials illustrate the entire process of implementing a design targeted for a DE-series
board.
Copyright ©2016 Altera Corporation.
Altera Corporation - University Program
May 2016
7
To Previous Page
Loading...
