15
EYEM (Eyemate)
Sit or lie in a relaxed environment and fit the Eye electrodes to your eyes. Use the Velcro strap
to adjust it so it sits firmly over the eyes and head. The electrodes should sit gently against the
skin around each eye. The pinholes in the mask allows you to see through the mask.
Switch ON/OFF switch to ON position (8).
Press POWER (11) and scroll with the UP/DOWN buttons to select EYEM
Press SELECT to begin this program. There is no need to select a time for this program as all
frequencies are preset with specific timeframes.
Each frequency will operate without repeating. The unit will beep twice and power off indicating
the end of the program. This program is timed at 10 minutes total.
Frequency sequence (Hz):
5, 292, 292.7, 30, 30.7, 9.1, 9.8, 0.3, 10, 0.7, 14, 1.5, 3.6, 95, 137, 18, 1.5, 3.6, 137, 1Hz
The program will begin with the intensity fully down for safety reasons.
Press the UP (10) arrow to adjust the intensity level to a suitable and comfortable feeling.
The program will end with 3 short ‘beeps’ and power off.
To Next Page