AlteredStates BT Pro - Entering Option Code

9
Enter option code:
The basic BT Pro LCD comes with software containing BT+ and Biofeedback and
temperature gauge, all other functions are optional and can be activated by pur-
chasing a key code. Every optional function has their unique code and associated
with its serial numbers.
To activate optional functions:
press and hold UP (10) key then switch the side power switch up to the ON posi-
tion.
When this enters the programming mode the LCD will display 4 zero’s (as shown
below) and the first on the left will be flashing.
Press UP (10) or DOWN (9) to select code number / letter.
After each correct number/letter is shown press SELECT (7)
repeat until all 4 digits are entered.
If the code was matched then display will show the program abbreviation for 3
seconds then the digits will turn back to 4 zero’s for the next key code to be en-
tered.
If only one code is entered switch the side Main Power switch off.
Turn this switch back on and Power (11) to check that this has been saved to the
units memory.