Alti-2 Altimaster Series - Technical Specifications; Altimaster Model Specifications

Mini-Cyalume Retention Sleeve Kit
The Cyalume Retension Sleeve Kit is used for illumination on the Altimaster II
Altimeters. The kit contains mounting screws, Cyalume light Retension Sleeve, and two
mini-Cyalume light sticks.
Check with Alti-2 Inc. for the part number for the Cyalume Retension Sleeve Kit
applicable to your altimeter.
Usage of this kit requires an Altimeter equipped with a U-Bracket or Wrist mount Kit.
TECHNICAL SPECIFICATIONS
Model Altimaster II Altimaster III Altimaster
Galaxy
Altimaster
Stratosphere
Case
Material
High Impact
fiberglass
reinforced
lexan.
Aluminum. Aluminum. Aluminum.
Lens
Material
High impact
1/8” thick
molded
lexan.
High impact
1/16” thick
molded lexan.
High impact
1/8” thick
molded lexan.
High impact 1/8”
thick molded
lexan.
Mechanism Single
pointer
aneroid
mechanism
with a linear
pointer travel
from 0-
18,000 feet
MSL in 1 ½
revolutions.
Single pointer
aneroid
mechanism
with a linear
pointer travel
from 0-18,000
feet MSL in 1
½ revolutions
Single pointer
aneroid
mechanism
with a linear
pointer travel
from 0-18,000
feet MSL in 1
½ revolutions
Single pointer
aneroid
mechanism with
a linear pointer
travel from 0-
30,000 feet
MSL in 2 ½
revolutions.
Dimensions 3.1” x 3.1” x
1.5”79 mm x
79 mm x 38
mm
2.5” x 2.5” x
1.1”63.5 mm
x 63.5 mm x
28 mm
2.5” x 2.5” x
1.1”63.5 mm
x 63.5 mm x
28 mm
2.5” x 2.5” x
1.1”63.5 mm x
63.5 mm x 28
mm
Weight 3.8
ounces108
grams
5.9 ounces 5.9 ounces 5.9 ounces