Alti-2 Altimaster Series User Manual

MAINTENANCE / SERVICING
Altimeter
Alti-2 does not recommend that the user disassemble the altimeter. Special equipment
is required for re-assembly. Unless specifically described here, all maintenance on your
altimeter should be performed by Alti-2.
NOTE: Disassembling your Altimaster voids all warranties.
Proper care
No servicing should be required with proper care and use.
Altimeters immersed in water should be returned to Alti-2 Inc.
Altimeters immersed in salt water are probably damaged beyond repair. However,
if this does occur, disassemble the altimeter and rinse with fresh water before
returning to Alti-2 Inc. (Do not reassemble the altimeter.)
Cleaning the Altimeter
To clean the altimeter, use a brush to remove any dirt that may accumulate. Wipe with a
damp cloth to remove any other contaminants.
Do not attempt to wash the altimeter by placing it in liquid.
Do not oil the altimeter.
Return for Servicing
If the altimeter behaves abnormally or unusually, discontinue use IMMEDIATELY and
return to Alti-2 Inc.
Discontinue use if the altimeter has been dropped onto a hard surface.
Return to:
Alti-2 Incorporated
1400 Flightline Blvd, Suite E
DeLand, MI 32724
Tel: (386) 943-9333
http://www.alti-2.com
Please be sure to include:
A method to contact you, such as daytime phone number, fax number, and/or email

Alti-2 Altimaster Series Specifications

General

Brand	Alti-2
Model	Altimaster Series
Category	Measuring Instruments
Language	English