Altigen IP 710 - Assigning a TFTP Server; Updating Phone Firmware

IP 710 Manual 23
3. Scroll to LOCAL ADDRESS, and press Enter.
4. Use the keys on the dial pad to enter a new IP address, using the * key
to enter periods.
5. Press Enter.
Assigning a TFTP Server
The default TFTP Server is set to 0.0.0.0.
To assign the TFTP server, use the following steps:
1. Press the Menu button.
2. Use / to select System, then press the Enter button.
3. Scroll to TFTP Server, and press Enter.
4. Use the keys on the dial pad to enter the new TFTP server address,
using the * key to enter periods, then press Enter.
Updating Phone Firmware
To update the phone firmware directly from the IP 710 phone, follow these
steps:
1. Press the Menu button.
2. Use the  button to scroll to System, then press the Enter button.
3. Scroll to TFTP Server, then press Enter.
4. Enter the TFTP server address, using the * key to input periods.
5. The IP 710 will download the firmware from the TFTP server on the
next reboot.
6. Reboot by unplugging and replugging the power cable OR by
pressing * * 3 and the Enter button.
7. Once the IP phone is rebooted, all LED lights come on for a brief
time.
8. The LCD screen displays [BOOTING] on the first line.
9. On the second line of the LCD screen, the following messages are
displayed in succession:
—CHECK MEMORY (RAM checking state)
—CHECK FW (Firmware checking state)