42
TS315
Output Power
2000 watts
(peak, 1300 LF + 700 HF), 1000 watts (continuous, 650 LF + 350 HF)
Drivers Low-Frequency: 15.0” (381 mm) driver, 3.0” (76 mm) high-temperature
voice coil
High-Frequency: 1.4” (35 mm) neodymium driver with precision waveguide
Crossover Frequency
2.0 kHz
Maximum SPL
134 dB
(peak), 131 dB (continuous) (dB-SPL @ 1 m)
Frequency Response
50 Hz – 20 kHz
(-3 dB)
Frequency Range
43 Hz – 22 kHz
(-10 dB)
Horn Coverage
90° horizontal x 60° vertical
(nominal)
Equalization
Contour switch with low- and high-frequency +3 dB boost
Connectors
(2) XLR+1/4” (6.35 mm) TRS combo inputs
(1) XLR output
(Link)
(1) IEC power cable input
Controls
Power switch, (2) volume control knobs
(1 per input), contour switch,
ground-lift switch
Indicators
(2) power LEDs
(1 front panel, 1 rear panel), clip limiter LED
Power Connection: IEC
Voltage: 100 V~, 110–120 V~, 220–240 V~, 50/60 Hz, switchable
Fuse: 100–120V T10AL AC250V, or 220–240V T5AL AC250V
Consumption: 800 W
Protection
Electronic clip, thermal and transducer overdrive protection
Enclosure
Trapezoidal, injection-molded, polypropylene with perforated steel grille
Mounting/Installation
Standard 36 mm pole socket, wall or ceiling mount with TSB125 bracket,
suspended with integral M10 points, wedge monitor
Dimensions
(height x width x depth)
25.7” x 16.6” x 15.4”
652 x 421 x 392 mm
Weight
41.3 lb.
18.8 kg
Trademarks & Licenses
Alto Professional is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. All other product
names, company names, trademarks, or trade names are those of their respective owners.
To Next Page
Loading...
