OPERATION
Dra we r Wa rmer ▪ Oper a tor’s M a n ual ▪ M N-46969 ▪ Rev 1 ▪ 5 /2 0
27
How to Display the Set or Actual Temperature
Before you begin Make sure:
▪ The drawer warmer is turned on.
Procedure The factory default is set to display the Set temperature. To change the control to
display the Actual temperature, do the following
Step Action
1. Press and hold the Temperature Display button a and the up arrow b for
five (5) seconds. The control will display “ACT” and then the Actual
temperature.
2. To return to show the Set temperature, press and hold the Temperature
Display button
c and the up arrow d for five (5) seconds. The control will
display “SET” and then the Set temperature.
Press the Temperature Display button at any time to display the Set or
Actual temperature.
Result The control will display the Set or Actual temperature.
To Next Page
Loading...
