MAINTENANCE
Dra we r Wa rmer ▪ Oper a tor’s M a n ual ▪ M N-46969 ▪ Rev 1 ▪ 5 /2 0
33
MAINTENANCE
Maintenance Schedule
Requirements ▪ See topic How to Clean the Drawer Warmer.
▪ Disconnect the drawer warmer from power source and let cool.
Daily
For daily maintenance, do the following.
▪ Remove any spills with disposable paper wipes or a damp cloth.
▪ Wipe the outside of the drawer warmer with a damp cloth.
▪ Check the display screen for cracking or peeling. Contact Technical Service if
needed.
Weekly For weekly maintenance, do the following.
▪ Clean the entire drawer warmer. Make sure to use a non-abrasive nylon scrub
pad.
▪ Do not spray the cleaner directly into the fan openings located in the rear of the
drawer warmer.
Monthly For monthly maintenance, do the following.
▪ Inspect drawers and drawer rails.
▪ Inspect drawer vent slides for proper operation (if applicable).
▪ Calibrate the temperature sensor.
▪ Inspect door handle screws and tighten if necessary.
Yearly For yearly maintenance, do the following.
▪ Check and tighten all wire connections.
▪ Measure the current draw.
▪ Test the heating elements for electrical short to ground.
▪ Inspect the condition of the cord and plug.
▪ Check and tighten the cord connection inside of the appliance control area.
▪ Measure the site voltage.
▪ Inspect and adjust voltage monitor board if needed.
▪ Inspect and test the control and control functions.
▪ Calibrate the temperature sensor.
NOTE: Must be performed by a qualified professional.
To Next Page
Loading...
