OPERATION
Dra wer Wa rmer ▪ Oper a tor’s M a n ual ▪ M N-46969 ▪ Rev 1 ▪ 5/ 2 0
32
How to Modify Drawer to Hold Oversized Pans
Before you begin ▪ Turn the drawer warmer off and make sure it is cool.
▪ Make sure you have a flathead screwdriver.
Procedure To modify the drawer to hold oversized pans, do the following.
Step Action
1. Remove the drawer from the drawer warmer.
2. Remove the four (4) screws holding the pan support bracket.
3. Slide the bracket to the back two (2) holes.
4. Re-install the four (4) screws.
5. Re-install the drawer into drawer warmer.
6. Insert oversized pan into drawer.
Result The drawer is now modified to hold oversized pans.
To Next Page
Loading...
