OPERATION
Dra we r Wa rmer ▪ Oper a tor’s M a n ual ▪ M N-46969 ▪ Rev 1 ▪ 5 /2 0
31
Continued from previous page
7. Press the Temperature Display button d to save the offset and exit
calibration mode.
8. Allow the drawer warmer to re-stabilize and compare the temperature again.
Tolerance at 140°F (60°C) is +/- 8°F (+/-4°C). Tolerance at 180°F (82°C) is +/-
10
°F (+/- 6°C).
Result The temperature sensor has been calibrated.
To Next Page
Loading...
