EasyManua.ls Logo

Alto-Shaam AR-7E

Alto-Shaam AR-7E
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
S E R V I C E
#852 AR-7E Rotisserie Opera ti on & C ar e Ma nual 2 6
Lamp Assembly
LP-34185
Radiant Heater
208V - EL-33974
240V - EL-33973
To Replace Bulbs:
A Remove four screws holding glass light
cover and gasket in place,taking care to
not let the glass cover fall into the oven.
B Pull bulb out
C Push replacement bulb (LP-34213)
in place
D Re-install glass cover and gasket,
securing with four screws removed in
step one.
The performance of this unit has been
optimized using the factory provided bulbs.
These bulbs should be replaced with an
exact replacement or with a factory
recommended replacement. These bulbs
have been treated to resist breakage and
must be replaced with similarly treated
bulbs in order to maintain compliance with
NSF standards. DO NOT over-tighten bulbs
in their receptacles as this can cause
damage to the bulb filament.
DO NOT HANDLE NEW BULB WITH BARE
HANDS. WHITE COTTON GLOVES SHOULD
BE WORN WHEN REPLACING BULBS.
I N T E R I O R S E R V I C E V I E W
B U L B R E P L A C E M E N T I N S T R U C T I O N S
A
B & C
D

Other manuals for Alto-Shaam AR-7E

Related product manuals