OPERATING INSTRUCTIONS
COMBITHERM® CT PROFORMANCE™ SERIES • STEP-BY-STEP PROCEDURES • MN-35948 • 31.
Confirm
HACCP ACCESS AND DOWNLOAD
(steps continued from previous page)
TO DOWNLOAD THE DATA COLLECTED:
REMOVE THE CAP OF THE USB PORT ON THE OVEN.
INSERT THE USB STICK. If the USB stick is not recognized
by the Combitherm oven, a question mark will appear on
screen. Try again with another ash drive device or call
Alto-Shaam Service.
When the data has made a successful transfer to the UB
drive, the screen will change. See below.
The download process will automatically create a folder on
the USB stick titled “haccp”. Each text file contains cooking
program specifics and each function the oven performed.
TOUCH THE GREEN CHECK MARK KEY TO
COMPLETE THE PROCESS.
Remove the USB stick and replace the cap on the
USB port on the oven.
To Next Page
Loading...
Need help?
General
