To Next PageTo Next PageWhat to do if I have a VFD comm failure on my Alto-Shaam COMBITHERM CTP6-10e?
If you're experiencing a 'VFD comm failure' in your Alto-Shaam Convection Oven, it could be due to several reasons: * Loss of power to the VFD. * VFD malfunction. * Disconnected CAN cable. * Incorrect CAN address on the VFD. To address these potential causes, begin by verifying that the unit is receiving power and that the circuit breaker is turned on.
What to do if I have a lower VFD comm failure on my Alto-Shaam COMBITHERM CTP6-10e Convection Oven?
If you're experiencing a 'lower VFD comm failure' in your Alto-Shaam Convection Oven, it could be due to several reasons: * Loss of power to the VFD. * VFD malfunction. * Disconnected CAN cable. * Incorrect CAN address on the VFD. To address these potential causes, begin by verifying that the unit is receiving power and that the circuit breaker is turned on.
What to do if I see a fan motor error on my Alto-Shaam COMBITHERM CTP6-10e Convection Oven?
If your Alto-Shaam Convection Oven displays a 'fan motor Error', it could be due to several reasons: * Wiring issues. * LED flashing on the motor control (refer to error codes). * Motor or fan wheel locked. * Hall sensor not detecting motor rotation. * Motor thermo temperature protection. * Damaged fan wheel. To troubleshoot, start by checking the unit is receiving power. Ensure the circuit breaker is on and check wiring to all components.
What to do if I see a lower fan motor error on my Alto-Shaam Convection Oven?
If your Alto-Shaam Convection Oven displays a 'lower fan motor Error', it could be due to several reasons: * Wiring issues. * LED flashing on the motor control (refer to error codes). * Motor or fan wheel locked. * Hall sensor not detecting motor rotation. * Motor thermo temperature protection. * Damaged fan wheel. To troubleshoot, start by checking the unit is receiving power. Ensure the circuit breaker is on and check wiring to all components.
Why is the control temperature high on my Alto-Shaam COMBITHERM CTP6-10e Convection Oven?
If the control temperature is too high on your Alto-Shaam Convection Oven, it could be due to: * Wiring issues to components. * A defective cooling fan on the relay board assembly. * A defective cooling fan on the display board assembly. * A defective main cooling fan. * A defective cooling fan on the motor drive. Begin troubleshooting by verifying the unit is receiving power and the circuit breaker is on. Also, check the wiring to all components.
General| Brand | Alto-Shaam |
|---|---|
| Model | COMBITHERM CTP6-10e |
| Category | Convection Oven |
| Language | English |
Explains signal words, intended use, and general safety guidelines.
Step-by-step guide for powering on the oven and screen calibration.
Overview of the oven's touch screen interface and its main sections.
Instructions and procedures for using the steam cooking function.
Instructions and procedures for using the combination cooking mode.
Instructions and procedures for using the convection cooking mode.
Instructions and procedures for reheating food.
Advanced cooking method using internal product temperature differentials.
Guide for using the oven's smoking functionality.
List of error codes, their descriptions, and possible causes.
Specific error codes related to motor control functions.
