ASSEMBLY/DISASSEMBLY
Ve ct or ™ H Se ries ▪ S ervice Ma nual ▪ MN -4 654 4 ▪ Rev 0 1 ▪ 11/19
77
ASSEMBLY/DISASSEMBLY
Removing and Installing the Blower Motor
Before you begin ▪ The oven must be disconnected from electric power.
▪ Have a replacement blower motor.
Procedure To remove and install the blower motor, do the following.
Step Action
1. Remove the top and right side service panels.
2. Disconnect the motor wire connectors.
Continued on next page
WARNING: Electric shock hazard.
Disconnect the appliance from electric power before servicing
the appliance.
To Next Page
Loading...
