Alto-Shaam Vector VMC-H4H

OPERATION
Vecto r H® S eries ▪ Operat or’s M anual ▪ M N-46 2 95 ▪ Rev 7 ▪ 6/22
61
Continued from previous page
3. Touch the temperature regulation icon e. The oven may need to warm up
or cool down to reach your cooking temperature.
Enter a preheat temperature using the key pad. Touch the check mark.
4. Now set the cooking parameters. Touch the cooking temperature f. Enter
the cooking temperature using the key pad.
Touch the cooking time g. Enter the cooking time using the key pad.
Slide the slider h to set the fan speed.
5. Touch the start icon i. The preheat process starts.
At the end of the preheat stage, the oven sounds an alert, and both the
chamber light and the door handle light flash.
Continued on next page
VMC-TS-008101
e
VMC-TS-009351
f
g
h
d
1
Action
Chamber ready
Continue
VMC-TS-008107
i