Need help?Do you have a question about the Alto AMX-140 and is the answer not in the manual?
General| Type | Analog |
|---|---|
| Phantom Power | Yes |
| Effects | No |
| Outputs - Main | 2 |
| EQ Bands | 3-band |
| Outputs | 2 |
Details for connecting microphones and line instruments to mono input channels 1 through 4.
Guide to adjusting input gain for microphone and line levels to prevent distortion.
Details on Hi (12kHz), Mid (2.5kHz), and Low (80Hz) EQ controls for channel frequency adjustment.
Explanation of AUX SEND 1 (PRE-FADER) and AUX SEND 2 (POST-FADER) controls for monitor and effects.
How to use presets, variations, mute switch, peak LED, and footswitch for digital effects.
Explanation of rear panel controls: Power, Phantom, and AC input.
Diagrams and explanations for 1/4" jack plugs and XLR connectors for wiring.
To Next Page
