Need help?Do you have a question about the Alto AMX-100FX and is the answer not in the manual?
General| EQ Bands | 3-band |
|---|---|
| Aux Sends | 1 |
| Effects | Yes |
| Phantom Power | Yes |
| Type | Analog |
Explains symbols like caution, risk of electric shock, and general warnings.
General guidelines for safe operation, handling, and maintenance.
Introduces the ALTO AMX-100(FX) mixer and the company's philosophy.
Provides a brief introduction to the mixer and its intended use.
Details the standard functionalities and connectivity of the mixer.
Highlights the digital effects processor and its capabilities.
Provides essential steps and precautions before operating the mixer for the first time.
Describes mono/stereo inputs, TRIM, phantom power, and input level setting.
Details EQ, AUX send, PAN/BAL, LEVEL, and PEAK LED for individual channels.
Covers MAIN MIX LEVEL, OUTPUT LEVEL display, and status LEDs.
Explains tape routing, 2TK IN, AUX RTN, and master AUX SENDS.
Describes various output and input connectors like PHONES, CTRL ROOM, MAIN MIX OUT.
Explains PRESETS, VARIATIONS, DFX MUTE, and PEAK LED for the effects module.
Describes the DFX FOOTSWITCH connector for remote operation.
Covers the main POWER and PHANTOM power ON/OFF switches on the rear.
Details the AC INPUT connector for power supply.
Step-by-step guide for connecting and setting up the mixer for optimal performance.
Illustrates proper wiring for 1/4" Stereo, 1/4" Mono, XLR Male, and XLR Line Socket.
Explains how experts can reconfigure AUX SENDs to PRE-FADER.
Lists parameters for VOCAL1 and VOCAL2 presets.
Lists parameters for LARGE HALL and SMALL HALL presets.
Lists parameters for LARGE ROOM and PLATE presets.
Lists parameters for SMALL ROOM and TAPE REVERB presets.
Lists parameters for SPRING REVERB and MONO DELAY presets.
Lists parameters for STEREO DELAY and FLANGER presets.
Lists parameters for CHORUS, REVERB+DELAY, REVERB+FLANGER, REVERB+CHORUS presets.
Provides a visual representation of the mixer's internal signal flow and components.
Details specifications for mono and stereo input channels.
Lists impedance values and EQ frequency response details.
Covers digital effects, presets, and main mix section technical details.
Details power supply voltages, consumption, and physical characteristics.
Outlines the procedure for registering the product and returning for service.
Explains the warranty coverage, limitations, and exclusions.
To Next Page
