EasyManuals Logo

Alto AMX-180 User Manual

Alto AMX-180
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
12
DSP effect module in this unit and function same as DFX MUTE switch .
4.22 DSP FOOTSWITCH
This socket is used to connect external footswitch for your convenient operation, it will activate/deactivate the
24
4.19 CTRL ROOM OUTPUT
These 1/4" sockets are used to send the control room signal to the studio monitor speakers or a second set of PA.
4.20 ALT OUTPUT
These 1/4" sockets are unbalanced outputs, the signal level to the ALT OUTPUT is adjusted by ALT 3-4 rotary
on the front panel.
4.21 PHONES
This socket will send out the mix signal to a pair of headphones.
21
22
23
4.23 AUX RETURN CONTROL
These two controls adjust the level of the signal
present at the AUX1&2 RETURNS jacks. The
signal is summed, or mixed in to the main L/R
mix bus.
4.24 EFX TO AUX1
Press this button, the signal present at AUX RET-
URN 2 will be routed to AUX1 bus instead of the
main mix output.
Without doubt, this feature will be very useful to
you.
4.25 ALT 3-4 CONTROL
This control is used to adjust the level of the ALT
output, and the adjustable range is from - to +15dB,
this is another way to offer you extra independent
stereo submix with its own level adjustment knob.
4.26 2TK IN CONTROL
This control is used to adjust the level of 2TK IN
signal, which can be varied from - to MAX.
4.27 AUX SENDS CONTROL
Both controls are used to determine the master
AUX SENDS levels. The adjustable range is from
- to +15dB. When the effect unit connected to mixer
has no input gain control, you can get a further +15dB
gain available from these AUX SENDS outputs.
4.28 OUTPUT LEVEL LED DISPLAY
This stereo 12 segments LED meter will indicate
the level of the overall output signal.
4.29 PHANTOM LED
This LED indicates when the phantom power is
switched on.
25
26
28
27
29
30
31
41
-4
-10
-30
-20
-7
0
-2
2
4
7
10
OUTPUT LEVEL
CLIP
PH
PWR
LR
-
8
+15
ALT 3-4ALT 3-4
1
-+15
8
2
-+15
8
AUX SENDS
LEVEL
SET
SOLO
ACTIVE
SOLO MODE
TO
CTRL ROOM
LEFT RIGHT
MAIN MIX LEVEL
CONTROL ROOM
PHONES/
PFL
AFL
10
dB
-10
-15
-20
-30
-40
-60
10
dB
-5
-10
-15
-20
-30
-40
-60
0
5
ALT 3-4
TO MAIN MIX
2TK
TO MAIN MIX
MAIN MIX
ALT 3-4
2TK IN
- MAX
8
2TK IN
-5
0
5
EFX TO AUX1
-+15
8
-+15
8
DFX MUTE
PRESETS
10
8
9
1
12
11
7
4
5
6
3
2
13
14
10
8
9
1
12
11
7
4
5
6
3
2
13
14
15
16
VARIATIONS
PEAK
15
16
AUX RTN 1
AUX RTN 1
AUX RTN 2 (DFX)AUX RTN 2 (DFX)
14. REV. + DELAY
16. REV. + CHORUS
15. FLANGERREV. +
5. LARGE ROOM
13. CHORUS
12. FLANGER
11. STEREO DELAY
10. MONO DELAY
9. SPRING REVERB
8. TAPE REVERB
7. PLATE
6. SMALL ROOM
4. SMALL HALL
3. LARGE HALL
2. VOCAL 2
1. VOCAL 1
39
27
25
26
28
29
30
32
31
33
34 35
38
41
42
40
37
36

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alto AMX-180 and is the answer not in the manual?

Alto AMX-180 Specifications

General IconGeneral
BrandAlto
ModelAMX-180
CategoryMusic Mixer
LanguageEnglish

Related product manuals