Alto AMX-180 User Manual

409mm 330mm 43mmDimension (W D H)
25watts
Power Consumption
12dB @ 2.5KHz
27
9. TECHNICAL SPECIFICATION
Mono input channels
Microphone input
Electronically balanced ,discrete input configuration
Frequency response
10Hz to 55KHz, 3dB
Distortion (THD&N)
Gain range
SNR (Signal Noise Rated)
Line input
Frequency response
Distortion (THD&N)
Sensitivity range
0.005% at +4dBu, 1KHz
0dB to 44dB(MIC)
115dB
Electronically balanced
10Hz to 55KHz, 3dB
0.005% at +4dBu, 1KHz
+15dBu to -30dBu
Stereo input channels
10Hz to 55KHz, 3dB
Main Mix Section Noise (Bus noise )
Fader 0 dB, channels muted:-100.0dBr (ref.:+4dBu)
Fader 0 dB,all input channels assigned and set to
UNITY gain:-90dBr(ref.:+4dBu)
Max output
+22dBu balanced XLR,
+22dBu unbalanced,1/4" jacks
AUX Return gain range
OFF to +15dB
AUX Sends max out
+22dBu
Line input unbalanced
Frequency response
Distortion (THD&N) 0.005% at +4dBu, 1KHz
Impedance Microphone input
1.4K ohm
Channel insert return
2.5K ohm
All other inputs
10Kohm or greater
Tape out
1K ohm
All other output
120 ohm
Equalization Hi shelving
Mid bell
Low shelving
Power supply
(AC/AC Adaptor)
Main voltage
USA/ Canada 100-120V~,60Hz
Europe 210-230V~,50Hz/60Hz
U.K/Australia 240V~,50Hz
Physical
Net weight

Alto AMX-180 Specifications

General

Brand	Alto
Model	AMX-180
Category	Music Mixer
Language	English