3. CONTROL ELEMENTS
SPOTLIGHT
4. CONTROL ELEMENTS
12
43 AUX1-3 Fader
The AUX1-3 faders adjust the final level of the signal sent from the AUX1-3
bus to the AUX SEND1-3 jacks.
44 MONO OUT Fader
The MONO OUT fader adjusts the final level of the signal output from the
STEREO bus to the MONO OUT jack.
46 EQ Switch
Engage this button to add the stereo graphic EQ into the main mix output circuit.
It can be used to modify the frequency "contour" of a sound. If you release the
button free, the stereo graphic EQ will be bypassed.
45 ST OUT Fader
The ST OUT fader adjusts the final level of the signal sent from the STEREO
bus to the ST OUT jacks.
This fader is used to adjust the level of the return signal which is sent from the
built-in DSP to the STEREO bus.
42 DFX RTN Fader
41 PFL Switch
When this switch is engaged, the signal at the point before the ST OUT control
fader is sent to the PHONE jack.
40 AFL Switch
When this switch is on, the output signal that passes through the corresponding
fader is sent to the jack.
EQ OFF
EQ ON
-15
0
-10
-5
+10
+5
63
500250125
2K
1K
-15
0
-10
-5
+15
+10
+5
16K
8K4K
+15
STEREO GRAPHIC EQ
47
46
To Next Page
Loading...
