Alto APM10 - Amplifier Mode Connections

17
A
SPEAKERS
B
B
BRIDGE
1+
2+
+
MAX. OUTPUT 1000W/8 (A B,BRIDGE)
MAX. OUTPUT 500W/4 (A,B)
CLASS 2 WIRING WAY BE USED.
1 and 2 = 8 - 16 /SPEAKER
1 or 2 = 4 - 8 /SPEAKER
BRIDGE = 8 - 16 /SPEAKER
2+
2
+
1+
1
+
1+
1
+
A B
22
11
L
O
C
K
L
O
C
K
A
SPEAKERS
B
B
BRIDGE
1+
2+
+
MAX. OUTPUT 1000W/8 (A B,BRIDGE)
MAX. OUTPUT 500W/4 (A,B)
CLASS 2 WIRING WAY BE USED.
1 and 2 = 8 - 16 /SPEAKER
1 or 2 = 4 - 8 /SPEAKER
BRIDGE = 8 - 16 /SPEAKER
2+
2
+
1+
1
+
1+
1
+
A B
22
11
L
O
C
K
L
O
C
K
AUX1 + MONO Mode
MAINL+MAINRMode
And now some tips how to use the AMPLIFIER MODE switch
This is the most common application. The built-in amplifier drives two main speaker
cabinets Left and Right. The AMPLIFIER MODE is on MAIN L+MAIN R position.
With the AMPLIFIER MODE in AUX1+MONO position, channel1 drives a Main speaker
cabinet while channel2 drives a stage monitor.
5. INSTALLATION AND CONNECTION
Use either the speakon jacks
or phone jacks
Main Speaker
Main Speaker
AB
BRIDGE
AMP MODE
MAIN R
MONO
MAIN L
AUX 1
Use either the speakon jacks
or phone jacks
Main Speaker
Stage Monitor
AB
BRIDGE
AMP MODE
MAIN R
MONO
MAIN L
AUX 1