Alto PM-8 DRAGONFLY - For the Experts Who Wants to Know more

17
6. FOR THE EXPERTS WHO WANTS TO KNOW MORE
As we have told you previously in this Manual, the Aux Send 2 Control both on Mono and on stereo channels is factory
wired as POST-FADER. If you have some skill in electronic components soldering you can modify this setting and have
all your AUX sends configured as PRE-FADER.
Modification on mono and stereo channels
Disconnect
the POST route
Aux
(PRE)
POST
Before After
Aux
(PRE)
POST
Solder the PRE route