10
(3.2) Rear Panel
1. Power Switch: Flip this switch to power TrueMix 500 on and off.
Note: Always make sure to only turn the mixer on after all input devices have
been connected and before you turn on amplifiers. Always turn off all amplifiers
before you turn the mixer off.
2. Power: Use the included power adapter to connect TrueMix 500 to a power
outlet.
Note: Make sure the Power Switch is in the OFF position before connecting the
mixer to a power outlet.
3. USB Out: Connect the included USB Type-B cable here to use the TrueMix 500
with a computer for recording and playback. See (4.1) Operation > USB
Recording and Playback to learn how to do this.
(3.0) FEATURES
To Next Page
Loading...
Need help?
General