SPECIFICATIONS
Output Power: 600 W Continuous RMS, 1200 W Peak
Crossover: L-R output with high-pass filter at 80 Hz or flat for L-R satellite
Max SPL @ 1m: 123 dB Continuous, 126 dB Peak
Frequency Response: 37 Hz – 125 Hz (@ -10 dB) under analog processor
Low Frequency: 18" (457 mm) woofer, 3" (76 mm) copper sandwich voice coil
Input Level: L-R input line at 0dBu
Connectors: Input: Left/mono 1/4" TRS or XLR; Right XLR
Output: Left/mono XLR; Right XLR
Link: Left/mono XLR; Right XLR
Cabinet: 18mm plywood, glued and reinforced, resistant black paint finish,
metal grille, rubber feet
External Control: Volume control, phase switch, HPF (80Hz or bypass), power-on with LED,
clip limiter with LED, ground lift
Power supply: 100-120V/220-240V, 50/60 Hz
Dimensions (H x W x D): 28.6" x 20.7" x 22.8" (726 mm x 526 mm x 578 mm)
Weight (speaker only): 77.4 lbs (35.1 kg)
Inrush current at initial switch-on: 6.93 A
Inrush current after power supply interruption: 7.13 A
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
MANUAL VERSION 1.2
To Previous Page
Loading...
