33
Appendix (English)
Technical Specifications
System Type
2-way active ported loudspeaker
LF Driver
15" (381 mm) woofer, 2" (51 mm) voice coil
HF Driver
1" (25 mm) ferrite driver, 1" (25 mm) voice coil
Amplifier
600 W (peak), Class D
Horn Coverage
90° H x 45° V
Frequency Response
65 Hz – 20 kHz (-3 dB)
Crossover Frequenc
2.2 kHz
Max SPL
124 dB-SPL at 1 m
Electronic Protection
Electronic clip, thermal, and transducer overdrive protection
Enclosure Construction
Injection-molded plastic housing, perforated metal grille, rubber
feet, side and top handles
Connectors
1 XLR -1/4” combo Line/Mic input, 1 USB type A flash drive input,
1 XLR Link output, IEC power connector
Controls
Power switch with green LED, Line/Mic Volume control, USB
Volume control, Line/Mic input switch, EQ Contour switch,
Signal/Limit LED, Ground lift switch, USB Power, previous track,
next track, loop, play/pause and stop.
Mounting 36 mm standard pole mount socket
Supported USB File Types MP3, WAV, WMA
Supported USB File Systems FAT16, FAT32
Power
Power Supply: 100/110-120V, or 220-240V; 50/60 Hz
(factory configured)
Fuse: 110-120V T4AL AC 250V; 220-240V T2AL AC 250V
Dimensions
(width x depth x height)
14.4" x 24.6" x 15.1"
366 mm x 625 mm x 386 mm
Weight
32.8 lbs.
14.86 kg
Specifications are subject to change without notice.
Trademarks and Licenses
Alto Professional is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
All other product or company names are trademarks or registered trademarks of their respective owners.
To Next Page
Loading...