Need help?Do you have a question about the Altronix acm8cb and is the answer not in the manual?
General| Output Voltage | 12VDC or 24VDC |
|---|---|
| Operating Temperature | 0° C to 49° C (32° F to 120° F) |
| Individual Output Control | Yes |
| Agency Listings | CSA Standard C22.2 No.205-M1983 |
| Output Current | 8A total |
| Main Fuse | 10 amp @ 250V |
| Indicators (LED) | AC input and DC output LED indicators |
| Features | Eight (8) individually controlled outputs |
| Enclosure | Metal |
| Dimensions | 13.5"H x 13"W x 3.25"D (342.9mm H x 330.2mm W x 82.55mm D) |
| Outputs | 8 |
Configuration chart detailing Altronix models, outputs, ratings, and listings.
Detailed technical specifications, including power, inputs, outputs, and features.
Options for powering the unit, including single or dual isolated power inputs.
Supports normally open or open collector sink trigger inputs.
Eight (8) outputs offering Fail-Safe/Fail-Secure modes and dry form 'C' relay contacts.
Details on fuse and PTC ratings, and total output current limits.
Selectable fire alarm disconnect for outputs, with latching or non-latching options.
Physical dimensions of the ACM8/CB sub-assembly board.
Guidance on connecting single or dual DC power supplies for unit operation.
Configuring switched power, form 'C' outputs, and auxiliary outputs.
Connecting trigger inputs for activation via normally open or open collector sink.
Configuring fire alarm disconnect using NO, NC, or polarity reversal inputs.
Connecting devices to the FACP dry form 'C' output for normally open/closed operation.
To Next Page
