To Next PageTo Next Page
Need help?Do you have a question about the Altronix AL600ULACM and is the answer not in the manual?
General| Input Voltage | 115VAC 50/60 Hz, 3.5 amp. |
|---|---|
| Fire Alarm Disconnect | Yes |
| Agency Listings | UL, CUL |
| Dimensions | 15.5"H x 12"W x 4.5"D (393.7mm H x 304.8mm W x 114.3mm D) |
| Weight | 11.5 lbs (5.22 kg) |
| UL Listed | Yes |
| CUL Listed | Yes |
| Input | 50/60 Hz |
| Output Voltage | 24VDC |
| Output Current | 6A |
| Maximum Load Current | 6A |
| Operating Temperature | 0°C to 49°C |
Details how ACM series units distribute and switch power for access control systems.
Specifies power input options, trigger input types, and FACP disconnect inputs.
Covers output options like Fail-Safe/Secure, form 'C' relays, and auxiliary power.
Guide to mounting the unit and connecting unswitched AC power and earth ground.
Details on utilizing switched, form 'C', and auxiliary power outputs, and input triggers.
Guidance on using form 'C' dry contact outputs and unswitched auxiliary power.
Connecting trigger inputs and configuring FACP disconnect options.
Connecting backup batteries and setting up AC/battery supervision.
Illustrates typical wiring connections for access control systems.
Explanation of Power Supply Board and ACM8 LED indicators.
Lists and explains terminals on the Power Supply Board.
Lists and explains terminals on the ACM8 Access Power Controller.
Diagrams for single and dual isolated power supply connections.
Diagrams for various FACP trigger input and output configurations.
Worksheet to calculate required battery capacity for AL1024ULACM model.
Detailed dimensions and mounting hole specifications for the enclosure.
