Nexto Logger
Nexto Series
NL717
CE117100 Rev. B
Diagram Notes:
1. Protective Earth terminal for power supply. Shall be externally connected to ground.
2. External power supply connection.
3. Typical connection of digital input (sink type). C0 is the common point for the isolated group I00 to I07.
4. Protective Earth terminal for communication ports. Shall be externally connected to ground.
5. Use Ethernet cables informed on Related Products section.
6. Typical connection of current analog input (field device with power supplied separately from analog signal).
7. Typical connection of current analog input (field device with power supply with the analog signal, 2-wire).
8. Typical sensor connection with 12Vdc power supply and SDI-12 communication.
12