ALTUS Nexto NX3004 User Manual (English)

Questions and Answers:

S
Sharon BrownAug 12, 2025
How to troubleshoot an ALTUS Nexto NX3004 Processor that does not power on?
- C
  craigwilsonAug 12, 2025
  If your ALTUS Processor does not power on, the issue might stem from a lack of power supply or incorrect power delivery. To resolve this: - Ensure the CPU is correctly connected in the rack. - Power off the system and remove all modules from the bus, leaving only the power supply and the CPU connected. - Power on the bus to check the functionality of both the external power supply and the one in the rack. - Confirm that the supply voltage reaches the Nexto power supply contacts with correct polarization.
S
Sean DavidsonAug 18, 2025
What to do if my ALTUS Processor does not communicate?
- C
  Christine WilliamsAug 19, 2025
  If your ALTUS Processor does not communicate, it might be due to a bad contact or incorrect configuration. Here’s how to address it: - Check every communication cable connection to ensure they are secure. - Verify the serial and Ethernet interfaces configuration within the MasterTool IEC XE software.
A
Alicia FerrellAug 27, 2025
Why does my ALTUS Nexto NX3004 CPU screen show the message 'WRONG SLOT'?
- H
  hendersonsharonAug 27, 2025
  If your ALTUS Processor CPU screen displays the message 'WRONG SLOT', it indicates that the CPU is in an incorrect position. For models NX3010, NX3020, and NX3030, ensure the CPU is placed in slots 2 and 3 of rack 0. For CPUs NX3004 and NX3005, place them in slots 0 and 1 of rack 0.
M
Michael RomeroSep 3, 2025
What to do if my ALTUS Nexto NX3004 Processor does not recognize the memory card?
- M
  Michael RobinsonSep 3, 2025
  If your ALTUS Processor does not recognize the memory card, the problem might be due to a bad connection or the card not being properly mounted. To fix this: - Ensure the memory card is properly connected in its compartment. - Verify that the memory card is inserted correctly, following the indication on the CPU's frontal panel. - Check if the memory card was accidentally unmounted via the MS button on the frontal panel, indicated on the CPU graphic display.

ALTUS Nexto NX3004 Specifications

General

Brand	ALTUS
Model	Nexto NX3004
Category	Processor
Language	English

ALTUS Nexto NX3004 User Manual

Table of Contents

Questions and Answers:

ALTUS Nexto NX3004 Specifications