ALTUS Nexto NX3004 User Manual

1. Introduction
5
MU209511
Manual de Utilização Cabeça PROFIBUS PO5064 e
Cabeça Redundante PROFIBUS PO5065
Portuguese
MU209020
Manual de Utilização Rede HART sobre PROFIBUS
Portuguese
MU223603
Nexto IEC 60870-5-104 Server Device Profile Domument
English
Table 1-1. Related Documents
Visual Inspection
Before resuming the installation process, it is advised to carefully visually inspect the equipments,
verifying the existence of transport damage. Verify if all parts requested are in perfect shape. In case
of damages, inform the transport company or Altus distributor closest to you.
CAUTION:
Before taking the modules off the case, it is important to discharge any possible static energy
accumulated in the body. For that, touch (with bare hands) on any metallic grounded surface
before handling the modules. Such procedure guaranties that the module static energy limits
are not exceeded.
It’s important to register each received equipment serial number, as well as software revisions, in
case they exist. This information is necessary, in case the Altus Technical Support is contacted.
Technical Support
For Altus Technical Support contact in São Leopoldo, RS, call +55 51 3589-9500. For further
information regarding the Altus Technical Support existent on other places, see
http://www.altus.com.br/site_en/ or send an email to altus@altus.com.br.
If the equipment is already installed, you must have the following information at the moment of
support requesting:
 The model of the used equipments and the installed system configuration
 The CPU serial number
 The equipment revision and the executive software version, written on the tag fixed on the
product side
 CPU operation mode information, acquired through MasterTool IEC XE
 The application software content, acquired through MasterTool IEC XE
 Used program version
Warning Messages Used in this Manual
In this manual, the warning messages will be presented in the following formats and meanings:
DANGER:
Reports potential hazard that, if not detected, may be harmful to people, materials,
environment and production.
CAUTION:
Reports configuration, application or installation details that must be taken into consideration
to avoid any instance that may cause system failure and consequent impact.
ATTENTION:
Identifies configuration, application and installation details aimed at achieving maximum operational
performance of the system.

ALTUS Nexto NX3004 Specifications

General

Brand	ALTUS
Model	Nexto NX3004
Category	Processor
Language	English