Alula RE667 User Manual

Connect Family
RE667 Slimline Touchpad
Connect+
™
Encrypted
I
N
S
T
A
L
L
G
U
I
D
E
I
The RE667 Slimline Touchpad is an intuitive interface for
controlling the Connect+ security system. It is AC powered and
communicates with the panel wirelessly.
Features
• Vibrant 7’’ Android tablet display
• Provides local control of security and automation functionality
• Wall or table mounted
• Encrypted, Connect+ enabled, battery-backed Wi-Fi™ connection
Installation Overview
1. Conrm the panel has a Wi-Fi DeviceLink card installed if using with Connect+.
Installing the Wi-Fi DeviceLink Card
• Disconnect the panel’s AC power and backup
battery.
• Install the Wi-Fi DeviceLink card in Slot 2 by
carefully aligning the nylon retention posts and
the 8-pin connector while pushing the card
rmly until all posts are fully seated.
• Reconnect the panel’s AC power and backup
battery.
• Verify the Wi-Fi card LEDs are on.
Slot 2
Backup
Battery
AC Power
Input
2. Choose a mounting location. Touchpad can be mounted on a wall or tabletop.
3. Verify signal strength at the desired location before mounting it permanently.
Verifying Signal Strength
1. Make sure the panel is powered and the Wi-Fi DeviceLink card is installed.
2. Power the Touchpad by applying AC power.
3. Select the “Connect” option to see the available networks. If the “Connect” option is
not available, press “Setup” then “Factory Default”.
4. If the signal strength displayed is less than 35, relocate Touchpad or Connect+ panel. If
neither options are available, install an RE621 Touchpad Range Extender.

Alula RE667 Specifications

General

Display Size	7 inch
Resolution	1024 x 600
Touch Type	Capacitive
Operating Temperature	0°C to 49°C (32°F to 120°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)

Summary

Installation Overview

Installing the Wi-Fi DeviceLink Card

Instructions for installing the Wi-Fi DeviceLink card into the panel, including power and battery disconnection.

Verifying Signal Strength

Steps to ensure adequate wireless signal for the Touchpad before permanent installation.

Touchpad Mounting Options

Table Top Mounting

Instructions for connecting the power adapter and mounting the Touchpad on a tabletop.

Wall Mounting

Guidance on wall mounting configurations, including stud and non-stud installations.

Settings

Touchpad Settings

Configuring touchpad features like favorites, panics, dashboard lock, and temperature scale.

Panel Settings

Home Screen Functions

Panic Functions

Triggering Alarms

How to trigger fire, police, or auxiliary alarms using the Touchpad interface.

Pro Tips

Unenrolling the Touchpad

Procedure to unenroll a Touchpad from the panel via the settings menu.