10
Product Use
How to refill water
1. Move the tray assembly out of the water storage barrel. (as shown in the figure).
2. Method I: Lift the entire water storage barrel up to refill clean water to the maximum
water level in the barrel. (Please ensure that the water storage barrel connector is dry)
3. Method II: Do not move the water storage barrel and add clean water to the
maximum water level with hand-held container.
Connect to the power supply
Please plug the USB power cord into the power supply and then the device is turned on
automatically. (Self-inspection when starting. Five LED lights are on for one second and the
off).
Maximum water
level
Do not refill water
above the maximum
water level, which
may result in water
overflow
To Next Page
Loading...