Need help?Do you have a question about the Amada WELD CHECKER MM-123A and is the answer not in the manual?
Details hazard signs, DANGER, WARNING, and CAUTION statements for safe operation.
Steps for connecting toroidal coils and voltage detection cables for accurate welding measurement.
Steps to power on and initialize the MM-123A unit for operation.
Overview of the five operational modes (C.ANGL, COUNT, SCH, STATUS, PRG) and their functions.
Configuration steps required before measurement, including mode, schedule, and range selection.
How to set and utilize the upper/lower limit judgment for quality control of welding parameters.
Detailed guide to setting various parameters like counters, schedules, system settings, and communication.
Technical specifications detailing measurement ranges, accuracy, and modes for current, voltage, and angle.
Details hazard signs, DANGER, WARNING, and CAUTION statements for safe operation.
Steps for connecting toroidal coils and voltage detection cables for accurate welding measurement.
Steps to power on and initialize the MM-123A unit for operation.
Overview of the five operational modes (C.ANGL, COUNT, SCH, STATUS, PRG) and their functions.
Configuration steps required before measurement, including mode, schedule, and range selection.
How to set and utilize the upper/lower limit judgment for quality control of welding parameters.
Detailed guide to setting various parameters like counters, schedules, system settings, and communication.
Technical specifications detailing measurement ranges, accuracy, and modes for current, voltage, and angle.
General| Measurement Items | Current, Voltage, Time |
|---|---|
| Display | LCD |
| Operating Temperature | 0 to 40 °C |
| Weight | Approx. 3 kg |
| Application | Welding diagnostics and monitoring |
| Time Measurement Range | 0 - 9999 ms |
| Power Supply | AC 100 to 240 V, 50/60 Hz |
| Resolution | 0.1 V, 1 ms |
To Next Page
