Inactive Standby:
When the unit has been set to ‘inactive standby’ mode, at eithe r
off/2/4/5/6 hours, the radio willautomaticallyturn off in the
Factory Reset
If you wish to reset your radio to it’s original factory setting. Press
factory reset in the menu press on the remote control or press
Note that all preference settings, stored preset stations, will
be removed after activating the factory reset.
SW version:
Press on the remote control or press on the unit
to view the version of firmware of the system.
Press on the remote control or press on the unit
to view the Bluetooth address of the unit.
12
set time.
on the unit to confirm f actory reset. The system will then
restart.
BD address:
To Next Page
Loading...
