Amana 12642722 User Manual

7
How to replace the
doors and hinges
1. Install hinge assemblies.
• Install top hinge loosely with
5
⁄16" hex
head screws.
• Install center hinge with Phillips
screws.
• Install bottom hinge with
3
⁄8" hex head
screws.
2. Insert bottom hinge pin
(some models).
• Locate bottom hinge
hole closest to out-
side edge of cabinet, and insert bot-
tom hinge pin. Replace any door
shims, if present.
4. Place hinge side of refrigerator door
on center hinge pin.
5. While holding refrigerator
door upright, tighten
down top hinge with
5
⁄16"
hex head driver and
replace hinge cover.
3. For freezer door
models only: Place
hinge side of freezer
door on bottom hinge
pin and hold freezer door upright while
installing center hinge pin with
5
⁄16" hex
head driver.
• Replace any applicable door shims.
• Make sure the hinge pin is installed
tightly.
For freezer drawer models only:
Install center hinge pin with a
5
⁄16" hex
head driver.
• Replace any applicable door shims.
• Make sure the hinge pin is installed
tightly.

Amana 12642722 Specifications

General

Brand	Amana
Model	12642722
Category	Refrigerator
Language	English