Amana AMS95 User Manual

®
is a trademark of Maytag Corporation and is used under
license to Goodman Company, L.P. All rights reserved.
© 2005 Goodman Company, L.P.
INSTALLATION I NSTRUCTIONS
AMS95
G
AS -F IRED W ARM A IR F URNACE
Installer: Affix all manuals adjacent to the unit.
*NOTE: Please contact your distributor or our
website for the applicable product data book
referred to in this manual.
ATTENTION INSTALLING PERSONNEL
As a professional installer you have an obligation to know the product better than the customer. This includes all safety
precautions and related items.
Prior to actual installation, thoroughly familiarize yourself with this Instruction Manual. Pay special attention to all safety
warnings. Often during installation or repair it is possible to place yourself in a position which is more hazardous than
when the unit is in operation.
Remember, it is your responsibility to install the product safely and to know it well enough to be able to instruct a customer
in its safe use.
Safety is a matter of common sense...a matter of thinking before acting. Most dealers have a list of specific good safety
practices...follow them.
The precautions listed in this Installation Manual are intended as supplemental to existing practices. However, if there is
a direct conflict between existing practices and the content of this manual, the precautions listed here take precedence.
(Type FSP CATEGORY IV Direct or Non Direct Vent Air Furnace)
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
These furnaces comply with requirements
embodied in the American National Standard
/ National Standard of Canada ANSI
Z21.47·CSA-2.3 Gas Fired Central Fur-
naces.
C
US
®
IO-276A 10/05

Amana AMS95 Specifications

General

Model	AMS95
Type	Gas Furnace
Efficiency Rating	95% AFUE
Heating Capacity	40, 000-120, 000 BTU/h
Ignition Type	Direct Spark Ignition
Stages	Two-stage
Warranty	10-Year Parts Limited Warranty, Lifetime Heat Exchanger Limited Warranty
Fuel Type	Natural Gas
Blower Motor	Multi-speed ECM

Summary

Installation Safety and Personnel

ATTENTION INSTALLING PERSONNEL

Critical instructions and safety advice for installers.

Unit Identification and Application

Component Identification

Detailed list and diagrams of furnace parts.

Product Application

Defines where the furnace can be installed and its requirements.

Installation Requirements

Location Requirements

Guidelines for selecting a suitable installation location.

Combustion and Ventilation Air

Ensuring adequate air for safe combustion and ventilation.

Venting, Piping, and Gas Connections

Vent/Flue Pipe and Combustion Air Pipe

Rules for installing vent, flue, and combustion air pipes.

Gas Supply and Piping

Connecting the furnace to the gas supply safely and correctly.

Electrical Connections and Startup

Electrical Connections

Instructions for wiring the furnace and accessories.

Startup Procedure & Adjustment

Step-by-step guide to safely start and adjust the furnace.

Operation and Performance Checks

Normal Sequence of Operation

Describes how the furnace operates in different modes.

Operational Checks

Verifying correct operation of key furnace components.

Safety Systems and Troubleshooting

Safety Circuit Description

Explains the function of various furnace safety circuits.

Troubleshooting

Guide to diagnose and fix common furnace problems.

Maintenance and Installation Completion

Maintenance

Procedures for regular inspection and upkeep.

Before Leaving an Installation

Installer's final checklist before leaving the job site.

AMS95 Wiring Diagram

Wiring Diagram

Visual reference for all furnace electrical connections.