To Next PageTo Next Page
Need help?Do you have a question about the Amana AMVM96 and is the answer not in the manual?
Compatible with ComfortNet systems, features self-calibrating gas valve and variable-speed airflow.
Details input/output BTU/h and AFUE ratings for different furnace models.
Provides cooling airflow data for AMVM96 models across different speeds.
Provides heating airflow data for AMVM96 models across different speeds.
Illustrates high and low voltage wiring for furnace components and controls.
The AMVM96/ACVM96 series represents a line of multi-position, modulating, variable-speed gas furnaces designed for efficient heating with up to 96% AFUE (Annual Fuel Utilization Efficiency). These furnaces are engineered to provide consistent comfort and quiet operation through advanced technology and robust construction.
At its core, the AMVM96/ACVM96 furnace is a heating appliance that uses natural gas to generate warm air, which is then distributed throughout a building via a duct system. The "modulating" aspect means the furnace can adjust its heat output in small increments, rather than simply turning on or off. This allows for more precise temperature control and avoids the wide temperature swings often associated with single-stage furnaces. The "variable-speed" feature refers to the blower motor, which can adjust its speed to deliver airflow gently and efficiently. This contributes to quieter operation and improved air circulation, as the system can ramp up or down gradually based on heating or cooling demand.
The furnace incorporates a heavy-duty Million-Air® stainless-steel dual-diameter, tubular heat exchanger, along with a stainless-steel secondary heat exchanger. These components are crucial for transferring heat from the combustion gases to the circulating air, ensuring high efficiency and durability. The dual-diameter design of the primary heat exchanger is a key feature for optimizing heat transfer.
For enhanced system integration and control, these furnaces are compatible with ComfortNet™ Communicating Systems. This allows for seamless communication between the furnace and other ComfortNet-enabled components, such as thermostats, to optimize overall system performance and efficiency. Even without a full ComfortNet system, the furnace's self-calibrating modulating gas valve can operate effectively with standard two-stage or single-stage thermostats, offering flexibility in control options.
The airflow system is designed to be both efficient and quiet. The variable-speed induced draft blower works in conjunction with the main circulator blower to ensure proper combustion and efficient air distribution. This design helps to maintain consistent temperatures throughout the conditioned space and can also contribute to improved dehumidification during cooling cycles when paired with a compatible air conditioning unit.
The AMVM96/ACVM96 furnaces are designed for multi-position installation, offering versatility for different home layouts. The AMVM96 models support upflow, horizontal left, or horizontal right configurations, while the ACVM96 models are suitable for downflow, horizontal left, or horizontal right installations. This adaptability simplifies installation in various residential settings.
Convenience is a key consideration in the design. The furnaces feature color-coded low-voltage terminals, which simplify wiring and provide provisions for connecting electronic air cleaners and humidifiers, allowing for integrated indoor air quality solutions. The easy-to-install top venting is standard, with alternate flue/vent locations available to accommodate diverse installation requirements.
For maintenance and service, the self-diagnostic control board is a significant advantage. It includes a constant memory fault code history, which can be output to a dual 7-segment display. This feature helps technicians quickly identify and troubleshoot issues, reducing diagnostic time and potential repair costs. The control board also offers multiple continuous fan speed options, allowing homeowners to customize air circulation for improved comfort and air quality. Auto-Comfort and enhanced dehumidification modes are available, further contributing to a comfortable indoor environment.
The cabinet itself is constructed from heavy-gauge steel and features a durable baked-enamel finish, providing both protection and a clean aesthetic. The cabinet is fully insulated, which helps to minimize heat loss and reduce operational noise. The heat exchanger section is lined with foil-faced insulation for added thermal efficiency. An airtight solid bottom is included for side-return applications, and easy-cut tabs are provided for effortless removal in bottom air-inlet applications, simplifying ductwork connections. Convenient left or right connections for gas and electric service offer additional installation flexibility.
Several design elements contribute to easier maintenance and long-term reliability. The durable SureStart® Silicon Nitride igniter is known for its longevity and resistance to wear, reducing the frequency of igniter replacements. The self-diagnostic control board, with its fault code history and display, is a primary maintenance aid, enabling quick and accurate problem identification.
The design of the cabinet and internal components facilitates access for servicing. While specific maintenance procedures are detailed in the full manual, the general layout is intended to allow technicians to reach key components for inspection, cleaning, or replacement. For instance, the easy-cut tabs for bottom air-inlet applications suggest that accessing the blower compartment for filter changes or cleaning is straightforward.
The use of high-quality materials, such as stainless steel for both primary and secondary heat exchangers, contributes to the furnace's durability and resistance to corrosion, which is important for long-term performance and reduced maintenance needs. All models comply with California NOx emissions standards, indicating a commitment to environmental responsibility and efficient combustion, which can also imply cleaner operation and less soot buildup over time.
Overall, the AMVM96/ACVM96 series combines advanced heating technology with user-friendly features and a design that supports efficient operation and straightforward maintenance, aiming to provide reliable and comfortable heating for years.
General| Model | AMVM96 |
|---|---|
| Efficiency Rating | Up to 96% AFUE |
| Heating Capacity | 40, 000 - 120, 000 BTU/h |
| Blower Type | Variable-Speed ECM |
| Heat Exchanger | Stainless Steel |
| Cabinet Type | Heavy-Gauge Steel |
| Type | Gas Furnace |
| Fuel Type | Natural Gas/Propane |
| Warranty | Lifetime Heat Exchanger Limited Warranty, 10-Year Parts Limited Warranty |
| Vent Type | Direct Vent |
