Amana AVZC180361 Series User Manual

This manual is to be used by qualified, professionally trained HVAC technicians only. The manufacturer does not assume any
responsibility for property damage or personal injury due to improper service procedures or services performed by an unqualified person.
© 2016-2017, 2019 Goodman Manufacturing Company, L.P.
RS6215001r4
April 2019
AVZC18 Inverter Heat Pump Condenser Units
with R-410A Refrigerant Blowers, Coils, and Accessories
Service Instructions
for
®
Brand
is a registered trademark of Maytag Corporation or its related companies and is
used under license to Goodman Company, L.P., Houston, TX, USA. All rights reserved.
O NLY PERSONNEL THAT HAVE BEEN TRAINED TO INSTALL , ADJUST , SERVICE
OR REPAIR ( HEREINAFTER , “ SERVICE ”) THE EQUIPMENT SPECIFIED IN THIS
MANUAL SHOULD SERVICE THE EQUIPMENT . T HE MANUFACTURER WILL NOT
BE RESPONSIBLE FOR ANY INJURY OR PROPERTY DAMAGE ARISING FROM
IMPROPER SERVICE OR SERVICE PROCEDURES . I F YOU SERVICE THIS UNIT ,
YOU ASSUME RESPONSIBILITY FOR ANY INJURY OR PROPERTY DAMAGE
WHICH MAY RESULT . I N ADDITION , IN JURISDICTIONS THAT REQUIRE ONE OR
MORE LICENSES TO SERVICE THE EQUIPMENT SPECIFIED IN THIS MANUAL ,
ONLY LICENSED PERSONNEL SHOULD SERVICE THE EQUIPMENT . I MPROPER
INSTALLATION , ADJUSTMENT , SERVICING OR REPAIR OF THE EQUIPMENT
SPECIFIED IN THIS MANUAL , OR ATTEMPTING TO INSTALL , ADJUST , SERVICE
OR REPAIR THE EQUIPMENT SPECIFIED IN THIS MANUAL WITHOUT PROPER
TRAINING MAY RESULT IN PRODUCT DAMAGE , PROPERTY DAMAGE ,
PERSONAL INJURY OR DEATH .
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
PROP 65 WARNING
FOR CALIFORNIA CONSUMERS
0140M00517-A

Amana AVZC180361 Series Specifications

General

Brand	Amana
Model	AVZC180361 Series
Category	Heat Pump
Language	English

Summary

IMPORTANT INFORMATION

SAFE REFRIGERANT HANDLING

Procedures and precautions for handling refrigerants safely.

SYSTEM OPERATION

Explanation of how the heat pump system operates.

TROUBLESHOOTING

Guidance for diagnosing and resolving system issues.

PRODUCT IDENTIFICATION

Nomenclature Breakdown

Explanation of model number coding and component identification.

SERVICING

System Start-Up Test

Procedure for initial system testing after installation.

Setting Thermostat to Pump Down

Procedure for pumping down refrigerant to the outdoor unit.

Checking Compressor

Procedures for testing compressor resistance and ground faults.

REFRIGERATION PROCEDURES

Evacuation

Process for removing air and moisture from the system.

Charging

Procedures for charging the system with refrigerant.

Checking Subcooling

Procedures for measuring and adjusting subcooling.

DATA AND DIAGRAMS

Thermistor Resistance and Temperature Characteristics

Data table for thermistor resistance and temperature.

Pressure vs Temperature Chart

Chart relating pressure and temperature for R-410A.

Wiring Diagrams

Diagrams illustrating electrical connections.