10
Freezer Features
Caution
To avoid property damage, confirm shelf
is secure before replacing items on shelf.
Automatic Ice Maker
• Confirm ice bucket is in place and ice maker arm is
down.
• After freezer section reaches normal temperature,
ice maker fills with water and begins operating.
Allow 24-48 hours after installation before first
harvest of ice. Ice maker produces 7 to 9 harvests
of ice in a 24-hour period under ideal conditions.
• After ice is formed, ice maker drops ice cubes into
ice storage bucket. During ice production, ice maker
arm raises and lowers. When ice storage bucket is
full, ice maker arm turns ice maker off. Discard first
3 harvests of ice after initially connecting
refrigerator to household water supply and after
extended periods of non-use.
• Stop ice production by raising ice maker arm. A
definite click is heard when proper position is
reached. Ice maker arm will remain in that position
until pushed down.
Caution
To avoid damage to ice maker, observe the
following:
• Do not force ice maker arm down or up,
past stop position.
• Do not place or store anything in ice
storage bucket.
• Remove hook-style door shelves by lifting ends and
releasing hooks on bottom of shelf.
• Replace hook-style shelves by inserting hooks and
lowering bottom of shelf. Push down on ends.
Door Shelves
• Remove slide-style door shelves by lifting ends and
pulling out.
• Replace slide-style door shelves by placing shelf on
glides and sliding down.
To Next Page
Loading...
Need help?
General
