Do you have a question about the Amana GUIA115A40 and is the answer not in the manual?
Essential safety instructions, gas leak procedures, and furnace operation guidelines for safe use.
Cooling and heating speed charts for variable speed two-stage furnaces.
General guidelines for providing adequate air for combustion and ventilation in buildings.
Describes the normal heating sequence for integrated ignition controls.
Lists common faults, causes, and diagnostic light codes for furnace operation.
Recommended annual checks, filter importance, and replacement procedures.
Essential tools and procedure to calculate BTU input and check furnace performance.
Detailed steps for testing voltage, wiring, thermostat, controls, and gas valve.
Schematic for White-Rodgers 50A50 ignition control used in GUIA, GUIC, GCIA, GCIC models.