18
XIII. Accessories and Functional
Parts
Sheet Metal Accessories
Additional Amana accessories, as described in Table 4,
can be purchased to fit specific application needs. Ac-
cessories can be ordered by the part numbers in the
table and each accessory includes its own separate
instructions.
Accessory
Duct Transition Over/Under
Horizontal Duct Covers
Coil Guard Kit
Compressor Sound Blanket
Horizontal Filter Kit
Propane Gas Conversion Kit
High Altitude Kit
Table 4
Accessory List
Functional Parts
Blower Housing Flame Roll-Out Switch
Blower Motor Gas Orifice
Blower Wheel Heat Exchanger
Burner High Limit Switch
Compressor Secondary Limit
Condenser Coil Ignitor/Flame Sensor
Condenser Fan Blade Induced Draft Motor
Condenser Fan Motor Pressure Switch
Contactor Pressure Switch Hose
Evaporator Coil Transformer
Fan Timer Board
Figure 16
Functional Parts List
General Information
1. Refer to the description in Figure 16 when ordering
any of the listed functional parts. Be sure to provide the
unit model, manufacturing, and serial numbers with the
order.
2. Although only functional parts are shown in Figure
16, all sheet metal parts, doors, etc. may be ordered by
description.
3. Parts are available from your Amana distributor.
To Previous Page
Loading...
Need help?
General
