18
User Options
There are several options you can change to customize the operation of the oven for your business. The table below shows
these options; the factory setting is shown in bold type.
1. Oven must be off. To turn oven off, press ON/OFF keypad.
2. Press and hold “2” keypad until option screen appears.
3. Choose option by pressing Enter keypad then use Scroll Up and Scroll Down keypad to select option to highlight
desired option.
4. Press Start keypad to save and press Stop / Reset to exit options mode.
5. Option 6, if “Password Needed” is highlighted press Program keypad to view or edit password.
CLEAN FILTER
When this message displays, clean the
air lter thoroughly. Cleaning the air
lter will not shut off the message.
The message will automatically stop
displaying after 24 hours.
Depending on microwave use and
environmental conditions, the lter
may need to be cleaned more or
less frequently. Once the frequency
is determined, set the option for the
appropriate time frame.
Air lter and vents must be cleaned
regularly to prevent overheating of the
oven. Refer to Owner’s Manual for
complete cleaning instructions.
Air Filters
On Sides
CLEAN
FILTERS
Note: Refer to page 3 for Data Transfer
instructions (Option 17)