AFR-200 Installation & Operation Guide Page 20
Backup Data
1. Select Backup Data
2. Next click on Backup to Device
3. From here you can choose the local
configuration items to be backed up
to your device. Next, select the
content you want to backup.
4. Select Backup Start - This will
enable Backup to a USB Disk
in a fashion similar to the operations
performed to “Backup to Device”.
If the USB is not properly inserted the screen will read “Error – Failed to Read USB Disk”. If this
happens change the USB or try to reinsert it properly.
Restore Data
1. Select Restore Data
2. Click on Restore from Device and select the local configuration items to be restored, and then
save the selected items. (You can select the content you want to restore.)
3. If you choose “Restore from USB Disk” the operations are similar to those performed to
“Restore from Device”.
If the USB is not properly inserted the screen will read “Error – Failed to Read USB Disk”. If this
happens change the USB or try to reinsert it properly.
.
To Next Page
Loading...
