AFR-200 Installation & Operation Guide Page 13
User Management
New Users
1. Go to the main menu and select User Mgt.
2. Select New User
3. Select User ID - enter the User ID by using the keypad and then pressing OK.
4. Click on Face
5. Focus your eyes inside the green box
6. Follow verbal instructions from the terminal until your face has been verified. The Terminal
will respond with “Thank You” to let you know this has been completed.
Confirmation of Face Verification
To confirm that you have successfully enrolled
your face use the back arrow to revert back to
the AMANO screen.
From the AMANO screen, face forward and look
directly at the screen. At the top of the screen it
will say “Face Detection Start”. Hold still in front
of the screen as it counts down on the screen
from >4< to >1<. Once the countdown is
complete the terminal will instruct you that you
have been “Verified by Face”.
To Next Page
Loading...
